Madeleine Jacobson Wrenches September 08th, 2018 - 23:29:14
There are two basic types of torque wrenches on the market, what are called "beam" wrenches and "micrometer" wrenches. Beam wrenches count on the built-in flexibility of any material. As torque is applied, the wrench flexes, while another rod, with a pointer at the end, indicates torque being applied on a scale.
If you are buying a torque wrench for your car, you should buy a 1/2 inch square drive tool, as 3/8 in drive tools only work on lower torque settings (typically below manufacturer's specifications). Adapters are available to reduce the 1/2 inch square drive to 3/8 inch square to fit the more common socket size that most people have.
Toolkits come with a variety of selections from a basic 8 piece wrench set, on up to 16, 32, 64 or even 256 piece or more sets. While a few common wrenches will cover most tasks, having a large toolkit with a full selection of wrenches insures that you are ready for any job that comes your way.
As its name suggests, the pipe wrench is used on for the maintenance and repair of pipes of the soft iron variety. A pipe wrench is also used on other fittings with a rounded surface like rods and bolts.
When tightening a bolt to the proper torque, it is essential that your hand which is pulling the wrench is cantered on the handle of the wrench. Having it too close or far from the socket actually affects the ultimate torque value you are tightening to. Moving your hand closer to the socket reduces the total "foot-pounds" of torque you are applying, while moving it away, closer to the end of the wrench increases the "foot pounds of torque you are applying."