Maryanne Owen Wrenches September 14th, 2018 - 22:15:26
There are two basic types of torque wrenches on the market, what are called "beam" wrenches and "micrometer" wrenches. Beam wrenches count on the built-in flexibility of any material. As torque is applied, the wrench flexes, while another rod, with a pointer at the end, indicates torque being applied on a scale.
Most manufacturers of torque wrenches supply them with a plastic storage box to protect them. They also often come with the 1/2 inch to 3/8 inch square drive adapter; some even come with a drive extension.
When tightening a bolt to the proper torque, it is essential that your hand which is pulling the wrench is cantered on the handle of the wrench. Having it too close or far from the socket actually affects the ultimate torque value you are tightening to. Moving your hand closer to the socket reduces the total "foot-pounds" of torque you are applying, while moving it away, closer to the end of the wrench increases the "foot pounds of torque you are applying."
Typically, a pipe wrench is composed of an upper hook jaw and a lower heel jaw, both connected to a flat handle. The lower jaw is adjustable to the size of the metal object. Forward pressure on the handle pulls the jaws closer for ease of gripping and turning. Usually made of aluminum or steel, pipe wrenches are available in various sizes measured by the length of the handle.
The Monkey wrench Otherwise known as gas grips, this is a traditional type that comes with a straight and long handle. The tool's forged metal makes it highly durable. This type wrench is mostly used on projects of large scale. In this type of wrench, the handle is extremely smooth and the size of the jaw can vary. Some of these tools are so large that they can even grip a large pipe of say, 3 inches.