Thelma Craft Wrenches September 04th, 2018 - 13:26:55
Typically, a pipe wrench is composed of an upper hook jaw and a lower heel jaw, both connected to a flat handle. The lower jaw is adjustable to the size of the metal object. Forward pressure on the handle pulls the jaws closer for ease of gripping and turning. Usually made of aluminum or steel, pipe wrenches are available in various sizes measured by the length of the handle.
There are two basic types of torque wrenches on the market, what are called "beam" wrenches and "micrometer" wrenches. Beam wrenches count on the built-in flexibility of any material. As torque is applied, the wrench flexes, while another rod, with a pointer at the end, indicates torque being applied on a scale.
Of the two types of torque wrenches, the micrometer wrench is definitely the more accurate. Typically, they are rated as being accurate to four percent of torque set. However, this accuracy can easily be lost if the wrench is not reset to zero before storage. Beam wrenches don't have this possibility of losing their accuracy, but are less accurate right out of the box. The accuracy of these beam wrenches is typically 12 percent, but can be less on higher torque settings, especially if the operator's hand is shaking from the pressure they are applying.
The Monkey wrench Otherwise known as gas grips, this is a traditional type that comes with a straight and long handle. The tool's forged metal makes it highly durable. This type wrench is mostly used on projects of large scale. In this type of wrench, the handle is extremely smooth and the size of the jaw can vary. Some of these tools are so large that they can even grip a large pipe of say, 3 inches.
Micrometer wrenches are pre-set to the required torque on a vernier scale. An internal spring loaded mechanism measures the torque. When the bolt is tightened to the desired torque it "clicks."
Care to Shout Your Thoughts on Trimo Pipe Wrench Liberty Tool Wrenches 1000
Posts Related To Trimo Pipe Wrench