Vivian Berry Wrenches September 15th, 2018 - 04:05:29
Combination wrenches are available in a wide variety of sizes for both standard and metric nut and bolt combinations. This simple hand tool does not require electricity, is designed specifically for the job that it is made to do and is highly resistant to breakage.
The Monkey wrench Otherwise known as gas grips, this is a traditional type that comes with a straight and long handle. The tool's forged metal makes it highly durable. This type wrench is mostly used on projects of large scale. In this type of wrench, the handle is extremely smooth and the size of the jaw can vary. Some of these tools are so large that they can even grip a large pipe of say, 3 inches.
When tightening a bolt to the proper torque, it is essential that your hand which is pulling the wrench is cantered on the handle of the wrench. Having it too close or far from the socket actually affects the ultimate torque value you are tightening to. Moving your hand closer to the socket reduces the total "foot-pounds" of torque you are applying, while moving it away, closer to the end of the wrench increases the "foot pounds of torque you are applying."
As everyone who has been through an apprentice program knows, bolts are used in construction, manufacturing, and assembly of almost everything. By having a combination wrench set at the ready, you can show that you have the ability to place or remove a bolt easily and efficiently.
If you are buying a torque wrench for your car, you should buy a 1/2 inch square drive tool, as 3/8 in drive tools only work on lower torque settings (typically below manufacturer's specifications). Adapters are available to reduce the 1/2 inch square drive to 3/8 inch square to fit the more common socket size that most people have.