Evelyn Hoffman Wrenches September 10th, 2018 - 13:55:28
When tightening a bolt to the proper torque, it is essential that your hand which is pulling the wrench is cantered on the handle of the wrench. Having it too close or far from the socket actually affects the ultimate torque value you are tightening to. Moving your hand closer to the socket reduces the total "foot-pounds" of torque you are applying, while moving it away, closer to the end of the wrench increases the "foot pounds of torque you are applying."
Typically, a pipe wrench is composed of an upper hook jaw and a lower heel jaw, both connected to a flat handle. The lower jaw is adjustable to the size of the metal object. Forward pressure on the handle pulls the jaws closer for ease of gripping and turning. Usually made of aluminum or steel, pipe wrenches are available in various sizes measured by the length of the handle.
The Pipe wrench Otherwise called the Stillson wrench, this wrench mostly finds use among plumbers. This tool can be very convenient to use when working in a tight spot where the need for gripping power of an adjustable wrench is most needed. The tool has rough jaws with which it can securely hold the pipe. The pipes can be fitted easily using this wrench as the jaws will help the pipe to stay in place firmly.
When storing your wrenches, a tool storage chest, wrench holder or a standard tool box can be useful. Tool boxes and cases for wrenches, include soft cases in rollout and box style, as well as heavy plastic cases or even heavy duty steel, titanium and aluminum toolboxes for the serious mechanic. Wrenches can be stored in tool chests, roll up cases, and will help you find the exact tool you need for getting extra leverage on a stubborn bolt.
Of the two types of torque wrenches, the micrometer wrench is definitely the more accurate. Typically, they are rated as being accurate to four percent of torque set. However, this accuracy can easily be lost if the wrench is not reset to zero before storage. Beam wrenches don't have this possibility of losing their accuracy, but are less accurate right out of the box. The accuracy of these beam wrenches is typically 12 percent, but can be less on higher torque settings, especially if the operator's hand is shaking from the pressure they are applying.