Janie Travis Wrenches September 12th, 2018 - 21:51:54
As its name suggests, the pipe wrench is used on for the maintenance and repair of pipes of the soft iron variety. A pipe wrench is also used on other fittings with a rounded surface like rods and bolts.
Micrometer wrenches are pre-set to the required torque on a vernier scale. An internal spring loaded mechanism measures the torque. When the bolt is tightened to the desired torque it "clicks."
Typically, a pipe wrench is composed of an upper hook jaw and a lower heel jaw, both connected to a flat handle. The lower jaw is adjustable to the size of the metal object. Forward pressure on the handle pulls the jaws closer for ease of gripping and turning. Usually made of aluminum or steel, pipe wrenches are available in various sizes measured by the length of the handle.
The Pipe wrench Otherwise called the Stillson wrench, this wrench mostly finds use among plumbers. This tool can be very convenient to use when working in a tight spot where the need for gripping power of an adjustable wrench is most needed. The tool has rough jaws with which it can securely hold the pipe. The pipes can be fitted easily using this wrench as the jaws will help the pipe to stay in place firmly.
When tightening a bolt to the proper torque, it is essential that your hand which is pulling the wrench is cantered on the handle of the wrench. Having it too close or far from the socket actually affects the ultimate torque value you are tightening to. Moving your hand closer to the socket reduces the total "foot-pounds" of torque you are applying, while moving it away, closer to the end of the wrench increases the "foot pounds of torque you are applying."