Gracie Buchanan Wrenches September 12th, 2018 - 18:25:57
The Monkey wrench Otherwise known as gas grips, this is a traditional type that comes with a straight and long handle. The tool's forged metal makes it highly durable. This type wrench is mostly used on projects of large scale. In this type of wrench, the handle is extremely smooth and the size of the jaw can vary. Some of these tools are so large that they can even grip a large pipe of say, 3 inches.
Of the two types of torque wrenches, the micrometer wrench is definitely the more accurate. Typically, they are rated as being accurate to four percent of torque set. However, this accuracy can easily be lost if the wrench is not reset to zero before storage. Beam wrenches don't have this possibility of losing their accuracy, but are less accurate right out of the box. The accuracy of these beam wrenches is typically 12 percent, but can be less on higher torque settings, especially if the operator's hand is shaking from the pressure they are applying.
Most manufacturers of torque wrenches supply them with a plastic storage box to protect them. They also often come with the 1/2 inch to 3/8 inch square drive adapter; some even come with a drive extension.
An automotive tool set should contain a variety of common wrench sizes to handle automotive repairs while on the road. By having a wrench set in your vehicle you are prepared for any emergency car repairs that may be needed.
When tightening a bolt to the proper torque, it is essential that your hand which is pulling the wrench is cantered on the handle of the wrench. Having it too close or far from the socket actually affects the ultimate torque value you are tightening to. Moving your hand closer to the socket reduces the total "foot-pounds" of torque you are applying, while moving it away, closer to the end of the wrench increases the "foot pounds of torque you are applying."