Janie Travis Wrenches September 10th, 2018 - 01:54:47
Combination wrenches are available in a wide variety of sizes for both standard and metric nut and bolt combinations. This simple hand tool does not require electricity, is designed specifically for the job that it is made to do and is highly resistant to breakage.
A wrench is an invaluable tool for general repair and maintenance. The grip and mechanical advantage it provides enables the user to apply torque to turn nuts and bolts.
As its name suggests, the pipe wrench is used on for the maintenance and repair of pipes of the soft iron variety. A pipe wrench is also used on other fittings with a rounded surface like rods and bolts.
Of the two types of torque wrenches, the micrometer wrench is definitely the more accurate. Typically, they are rated as being accurate to four percent of torque set. However, this accuracy can easily be lost if the wrench is not reset to zero before storage. Beam wrenches don't have this possibility of losing their accuracy, but are less accurate right out of the box. The accuracy of these beam wrenches is typically 12 percent, but can be less on higher torque settings, especially if the operator's hand is shaking from the pressure they are applying.
When tightening a bolt to the proper torque, it is essential that your hand which is pulling the wrench is cantered on the handle of the wrench. Having it too close or far from the socket actually affects the ultimate torque value you are tightening to. Moving your hand closer to the socket reduces the total "foot-pounds" of torque you are applying, while moving it away, closer to the end of the wrench increases the "foot pounds of torque you are applying."