Cheri Spencer Wrenches September 07th, 2018 - 09:44:13
An automotive tool set should contain a variety of common wrench sizes to handle automotive repairs while on the road. By having a wrench set in your vehicle you are prepared for any emergency car repairs that may be needed.
If you are buying a torque wrench for your car, you should buy a 1/2 inch square drive tool, as 3/8 in drive tools only work on lower torque settings (typically below manufacturer's specifications). Adapters are available to reduce the 1/2 inch square drive to 3/8 inch square to fit the more common socket size that most people have.
Torque wrenches are precision tools and should be treated as such. Although most micrometer wrenches have a reversible ratchet head, they really should not be used as a ratchet, and especially not as a breaker bar. Most people who break their torque wrenches do so by trying to loosen an overly tight bolt with it. This overly stresses the internal mechanism, causing it to break, especially if the micrometer isn't set to a higher torque value than the pressure that is being applied.
When tightening a bolt to the proper torque, it is essential that your hand which is pulling the wrench is cantered on the handle of the wrench. Having it too close or far from the socket actually affects the ultimate torque value you are tightening to. Moving your hand closer to the socket reduces the total "foot-pounds" of torque you are applying, while moving it away, closer to the end of the wrench increases the "foot pounds of torque you are applying."
Three of the most common wrenches found in American homes are the pipe wrench, the adjustable wrench and the combination wrench.